Scaffolding & Building Equipment
- Scaffolding Tubes
- Scaffolding Fittings
- Scaffolding Boards
- System Scaffolding
- Scaffolding Ancillaries
- Towers & Ladders
- Formwork & Falsework
- Temporary Roofing
- Allen Key Clamps
- Site Safety
- Safety Wear
- Scaffolding Spanners
- Homepage
Willow End
Stoke Orchard Rd
Bishops Cleeve
Cheltenham
Gloucestershire
GL52 7DG
Company Registration 03679119
© Orchard Hire & Sales Ltd 2012
TEMPORARY ROOFING |
|
 |
X-beam
— Welded aluminium beam. Lengths 2m, 3m, 4m. Overall depth 750mm. Weight 6.7kg/m
(compared with steel at 13.3kg/m). Centre to centre
702mm. Comes with spigot connectors bolted in. Extra spigot-connector pins or bolts required to join beams together end to end.
Click link for loading guide. |
 |
Lattice
Beam — Welded aluminium beam.
Connected with spigot connectors and spigot connector pins or bolts.
Lengths 4, 5, 6, 8m. Depth 450mm. Click link for loading guide. |
 |
Spigot Connector — for lattice beam. chromate-passivated steel. |
 |
Spigot Connector Pin — fits through holes in the ridge unit or lattice beam and the spigot connector to pin them together. Zinc plated steel. |
 |
Ridge Unit — Welded aluminium. Joins beams together at a pitch of 15° using spigot connectors. Ridge pieces for temporary roofs at other pitches can be made to order. Ridge pieces are available for 450mm lattice beams & 750mm diamomd or X-beams. |
 |
Roofing Coupler ('Wriggly') — zinc-plated pressed-steel fitting. Connects corrugated sheets with a pitch of 76.2mm and a thickness of 0.5mm to 0.7mm to scaffold tube purlins. The maximum combined thickness of sheets that can be clamped together is 3.0mm. Individual sheets must be connected with a minimum of two couplers and must be installed in accordance with BS5973:1990. |
 |
Corrugated
Steel Sheet — galvanised. Lengths 2.4m, 3.0m &
3.6m. 0.75m effective width with overlapping edges. |