New and Used Scaffolding for Sale





Orchard Hire and Sales Ltd.
Willow End
Stoke Orchard Rd
Bishops Cleeve
Cheltenham
Gloucestershire
GL52 7DG
United Kingdom


Company Registered in England & Wales no. 03679119

© Orchard Hire & Sales Ltd 2017




 

SCAFFOLDING SPANNERS AND ACCESSORIES


Swing-over steel scaffold spanner with bluey hex box
Bluey Box Steel Scaffold Spanner — Steel poker handle. Hardened and tempered stainless steel swing-over 7/16" hex box.
Swing-over steel scaffold spanner with hexagonal box
Zinc-plated Pinched Box Steel Scaffold Spanner — Steel poker handle. Zinc-plated steel swing-over 7/16" hex box.
swing-over aluminium scaffold spanner with bihexagonal box
Aluminium Handle Scaffold Spanner — Aluminium poker handle. Zinc-plated steel swing-over 7/16" hex box.
half inch steel scaffold spanner with hexagonal box
1/2" Scaffold Spanner — Straight steel handle and zinc-plated steel swing-over hexagonal box for 1/2" nuts.
open ended scaffold spanner 21mm Fixed head spanner — wider opening to make it easier to fit the spanner to the nut. Quicker where space is restricted. 260mm long.
Fixed head and ratchet combination spanner
Combination 21mm Fixed Head and Ratchet Spanner (Gear Wrench ®) — 290mm long ratchet spanner with an open head at the opposite end.
podger spanner scaffold key Scaffold Key — Stainless steel one-piece podger. Hooked end for tightening bolts on band and plate type fittings.
scaffolding ratchet spanner
Flush Ratchet Spanner — one side 21mm for 7/16" nuts, the other side 23mm for 1/2" nuts. Ligtweight alloy construction with podger end for bands and plates. Switch operated reverse direction.
scaffolders magnetic spirit level Stabila Scaffolders' Magnetic Spirit Level (Stabila ®) Light alloy case. Sticks firmly to steel scaffold tubes with two integral rare-earth magnets. Length 24cm. Cuplok compatible systems scaffolding hammer with podger end Scaffolding Systems Hammer — Solid stainless steel one-piece mallet for Cuplok, Kwikstage and compatible fittingless scaffolding systems.
scaffold spirit level holder Spirit Level Holder
double scaffold spanner holder
Double Scaffold Spanner Holder
Tape measure holder for belt Tape Measure Holder — for 5m tape only.
scaffold spanner single holder
Single Scaffold Spanner Holder
Scaffolders phone holster Phone Holder — leather phone holder with press-stud clasp.
scaffolder belt
Scaffolders' Belt — medium or extra-large waist. Width 50mm.
Rhodius saw disk Abrasive Cutting Disk (Rhodius ®) A24P-BF511 (300x3mm). For use with Stihl and Makita petrol driven portable cutters. Cuts metal. EN12413. 
Rhodius cutting disk
Universal Cutting Disk — (Rhodius ®) LDW 40 (300x2.8mm). For use with Stihl and Makita petrol driven portable cutters. Suitable for cutting brick, concrete, roofing tiles, structural plaster, and limestone. EN13236
scaffolding fitting oil Scaffeze Plus(Zep ®)
5.0 ltr can. For servicing scaffold fittings. Displaces water and prevents rust. Releases seized nuts and bolts. Removes light rust and grease and protects scaffold fittings from corrosion.
masonry drill bit
Masonry Drill Bit — M20 bit for drilling holes to fit M16 threaded ring bolt drop-in anchors. M12 bit for drilling holes to fit 12mm threaded Excalibur ring bolt.
Stabila tape measure Tape Measure(Stabila ®) High quality 5m/16ft or 8m/26ft x 19mm steel tape with nylon coating to resist corrosion. Rubber and plastic case. Pause and lock button. Sand paper finish inside tape hook to help keep it in place during measurements.
Laser Distancer
Laser Distancer (Stabila ®) — Point and shoot operation with inbuilt viewfinder. Range up to 600ft (200m). Can be used to measure and calculate areas, volumes, partial lengths and add and subtract measurements. Indirect measuring with pythagoras and trapezoid functions. Useful for measuring the height of walls from a distance.
Large crayon for waterproof marking Paintstick — Suitable for marking metal, brick or timber. Waterproof and semi-permanent. Industrial use only. 
paint pens
Paint marker (Markal Pro-Line HP ®) — Suitable for marking or writing on metal. Waterproof and semi-permanent. Industrial use only.
Fitting Bucket
Fittings Bucket (Tub Trug ®) — Tough, flexible 25 litre plastic bucket for carrying fittings. Handles tested to 100Kg. Protected against frost and sunlight weathering.