01242 677999
Location
Contact
Terms
Props and Struts
Props
Adjustable height steel props for vertical support of structures. Load-bearing props should be braced with scaffolding tube for stability. Spray-paint finish. BS4074: 1982. Commonly referred to as Acrow props.
| Type | Length (m) | Weight (kg) | |
|---|---|---|---|
| Closed | Open | ||
| Size 0 Props | 1.04 | 1.83 | 11.28 |
| Size 1 Props | 1.75 | 3.12 | 16.34 |
| Size 2 Props | 1.98 | 3.35 | 17.48 |
| Size 3 Props | 2.59 | 3.96 | 20.20 |
| Size 4 Props | 3.20 | 4.88 | 23.84 |
Trench Struts
Adjustable length steel trench struts intended for horizontal use. 100mm² clawed end-plates for bracing timber trench linings.
| Type | Length (m) | Weight (kg) | |
|---|---|---|---|
| Closed | Open | ||
| Size 0 Trench Struts | 0.32 | 0.47 | 4.0 |
| Size 1 Trench Struts | 0.49 | 0.73 | 5.8 |
| Size 2 Trench Struts | 0.69 | 1.09 | 7.7 |
| Size 3 Trench Struts | 1.03 | 1.73 | 11.0 |
Push-Pull Props
Variable angle prop intended for supporting pre-cast concrete walls. Swivelling base and head plates must be bolted in position to the load and to the floor in order to provide bracing. BS4074. BS5507. Pin 080M40 BS970.
| Type | Length (m) | Weight (kg) | |
|---|---|---|---|
| Closed | Open | ||
| Size 0 Push-Pull Props | 1.14 | 1.83 | 15.8 |
| Size 1 Push-Pull Props | 1.85 | 3.12 | 23.0 |
| Size 2 Push-Pull Props | 2.08 | 3.35 | 24.0 |
| Size 3 Push-Pull Props | 2.69 | 3.96 | 27.0 |
| Size 4 Push-Pull Props | 3.30 | 4.88 | 31.6 |
Cantilever Masonry Supports
Max SWL 340kg. Fits on standard prop head-plate and inner-tube to provide temporary cantilever support to masonry while an opening is being created in a wall.
U-Heads
Zinc plated steel U-head attachment for supporting horizontal timber beams in falsework applications and other scenarios where beams or bearers need supporting temporarily. The adjustable U-heads have a 650mm screw-jack for insertion into the top of a 48.3mm scaffold tube, giving a height adjustment of 500mm. The fixed U-heads (or stirrup heads) have a 16mm spigot welded to the base for insertion into the top of a prop.
| Type | Imperial Width | Metric Equivalent | Weight (kg) |
|---|---|---|---|
| Adjustable U-Head | 4″ | 100mm | 4.70 |
| 6″ | 150mm | 5.75 | |
| 8″ | 200mm | 6.80 | |
| Fixed U-Head | 4″ | 100mm | 2.20 |
| 6″ | 150mm | 3.20 | |
| 8″ | 200mm | 4.25 |
Prop Bracing Double Couplers
Connects prop outer tube (60.3mm outer diameter) to scaffold tube (48.3mm O.D.) at 90°. Standard double couplers can be used to lace and brace inner tube of props.
Prop Bracing Swivel Couplers
Connects prop outer tube (60.3mm outer diameter) to scaffold tube (48.3mm O.D.) at any angle for diagonal bracing. Standard swivel couplers can be used to lace and brace inner tube of props.
Replacement Prop Ring, Pin and Chain
Zinc plated steel. Slides over the prop inner. Suitable for repairing Acrow Props.