These British made scaffolders' belts and frogs are constructed from thick riveted chrome split leather to a design that has been popular since 1970.
Chrome leather is tanned using chromium salts, which gives it a slightly blue colour. It is more supple than vegetable-tanned leather and does not discolour or lose shape as much in water.
IMN® zinc-plated steel poker-handle swing-over 7/16″ box scaffold spanner.
IMN® Stainless Steel straight handle scaffold spanner with swing-over 7/16″ box.
IMN® Stainless Steel poker-handle scaffold spanner with swing-over 7/16″ box.
IMN® Aluminium poker-handle scaffold spanner with swing-over 7/16″ stainless-steel box. Lighter than spanners with steel handles.
IMN® zinc-plated steel poker-handle and 1/2" swing-over box scaffold spanner.
IMN® stainless-steel straight handle 1/2" swing-over box scaffold spanner.
One side 21mm for 7/16" nuts, the other side 23mm for 1/2" nuts. Sainless steel construction with podger end for bands and plates. Switch operated reverse direction.
One side 21mm for 7/16" nuts, the other side 23mm for 1/2" nuts. Ligtweight alloy construction with podger end for bands and plates. Switch operated reverse direction.
Stainless steel one-piece podger or 'scaffold key' for Band & Plate 'Universal' fittings and DHs.
Solid stainless steel one-piece mallet for Cuplok, Kwikstage and compatible fittingless scaffolding systems.
Stabila ® light alloy scaffolders' boat level. Sticks firmly to steel scaffold tubes with two integral rare-earth magnets. Length 24cm.
Stabila® 5m/16ft or 8m/26ft x 19mm steel tape with nylon coating to resist corrosion. Rubber and plastic case. Pause and lock button. Sand paper finish inside tape hook to help keep it in place during measurements.
Universal manual sealless steel strapping tool suitable for banding neatly stacked bundles of tube or packs of boards. The banding is crimped directly onto itself, without the need for separate metal sleeves. Reliable, rugged and service-friendly. Simple to operate and light weight.
|Weight||3.9 kg||8.6 lbs|
|Strap qualities||up to 850 N/mm²||123'000 psi|
|Strap dimensions||12.7 – 20.0 x 0.38 – 0.58 mm||½ – ¾ x .015 – .023"|
Rhodius ® A24P-BF511. 300x3mm. Cuts metal. For use with petrol engine portable disc cutters. EN12413.
Rhodius ® LDW 40. 300 x 2.8mm. Cuts brick, concrete, roofing tiles, structural plaster, and limestone. For use with petrol-driven portable cutters. EN13236.
M20 bit for drilling holes to fit M16 threaded ring bolt drop-in anchors. M12 bit for drilling holes to fit 12mm threaded Excalibur ring bolt.
Zep® 25 litre drum or 5 litre can. For servicing scaffold fittings. Displaces water and prevents rust. Releases seized nuts and bolts. Removes light rust and grease and protects scaffold fittings from corrosion. Biodegradeable, but harmful to aquatic organisms. May cause long-term adverse effects in the aquatic environment. May cause damage to the lungs if swallowed.
The original 25 litre 'Fiel' brand heavy-duty flexible plastic trug (bucket) for carrying scaffold fittings. Handles tested to 100kg. Protected against frost and sunlight weathering. This is not an inferior quality trug that will easily split or tear. It is the ideal bucket for scaffolders. If you have been struggling to buy these buckets lately, we have them in stock.