Scaffolding Ties & Fixings

Ring-Bolt Scaffold-Tie

The ring slides over a 48.3mm diameter scaffold tube. A separate 16mm threaded steel socket inserts into concrete to act as a wedge anchor. The socket can either be 'hammer-set' or with a 'resin fixed' internal threaded sleeve. The forged ring bolt is stamped with a safe working load of 1270 kg.

Restraint Eye Scaffold-Tie

Screw-in eye for fixing into a variety of base materials (when used with nylon wall-plugs) such as concrete, solid bricks, hollow bricks, perforated bricks, aircrete, and blocks. It can also screw directly into timber without a plug The scaffold is attached to the ring with a hook-tie fitting. Stocked sizes 120mm and 300mm.

Self-Tapping Ring-Bolt Scaffold-Tie

Excalibur® self-tapping ring-bolt that screws directly into a 12mm hole drilled in concrete or masonry. The bolt can be removed as the scaffold is struck, leaving just a hole ie. no plug left behind.

Self-tapping Screw-Bolt

100mm self-tapping bolt that screws directly into a 12mm hole drilled in concrete, brick, wood, marble, block & stone. Can be used close to an edge without breaking the substrate. Suitable for use with allen-key clamps and other types of fitting that bolt to a wall or floor. Can also be used in conjunction with a resin anchor.

Hook fitting scaffold tie with hook facing away from the fitting

Scaffolding Hook-Tie

Hook fitting scaffold-tie with the hook facing away from the coupler. Clamps to the scaffold and hooks onto a fixed restraint-eye to tie the scaffold to the building.

Hook fitting scaffold tie with hook facing towards the fitting

Scaffolding Hook-Tie

Hook fitting scaffold-tie with the hook facing towards the coupler. Clamps to the scaffold and hooks onto a fixed restraint-eye to tie the scaffold to the building.

S-Type Super-Tie

This fitting is used in concrete and masonry with a 16mm threaded steel insert that acts as a wedge anchor. It can also be used to tie through a hole in a steel beam or column when fixed with a nut.

E-Type Super-Tie

This fitting is used in concrete and masonry with a 16mm threaded steel insert that acts as a wedge anchor. It can also be used to tie through a hole in a steel beam or column when fixed with a nut.

16mm Steel Socket

Zinc plated steel threaded socket that inserts into a hole drilled in masonry or concrete. Use with ring bolts and Super-Ties.

Nylon Plug

14mm x 75mm lightweight nylon fixing, used with a screw-in restraint eye in base materials such as concrete, solid bricks, hollow bricks, perforated bricks, aircrete, blocks, etc.